The best hammer drills are designed to provide impeccable, accurate, and precise drill mechanisms on a hard surface material like concrete. You can also make use of the Impact drivers to dig holes but the concrete materials can be very hard to drill through them but with the introduction of these specially designed hammer drill machines, the daunting task has become very easy and fast. The hammer drills work like standard drills with a twist in its mechanism which is the hammer function that provides the drill with the extra power to drive the bit through very hard materials like concrete, brick walls, and blocks with ease and comfort.
You might think of using drivers, screwdrivers, or impact wrenches as its alternatives but the quality of finishing that you will get from a hammer drill can be matched by none.
Table Of Contents
ENEACRO 1-1/4 Inch SDS-Plus 13 Amp Heavy Duty Hammer Drill, Safety Clutch 4 Functions with Vibration Control, ENRH3201
$127.95 in stock
Features
- ✔️【POWERFUL MOTOR】 13Amp industrial motor with 5.5 feet /lbs（7.4 joules)impact energy is designed to complete heavy duty concrete and metal working projects with ease and precision. Heat resistant copper wire motor allows long working time without burning the machine. Anti-dust bottom structure extend the hammer’s use life. ENRH3201 high-performance electric rotary hammer helps to increase your efficiency and makes a better life.
- ✔️【FOUR FUNCTIONS】 Four different functions of drill only(suitable for wood, steel , etc.), hammer only(suitable for concrete or brick) ,hammer drill(suitable for heavy duty work) function and chisel position adjustment adapt to variety of work scenarios which are easy to switch. You can quickly switch the functions by two different switches. Compared with single function switch design, double function switch design can extend 100% service life.
- ✔️【HUMANIZATION DESIGN】 Safety clutch protection designed to guarantee your wrist When the hammer is subjected to high torque force. 360° adjustable handle applies to different work and the upgraded double layer anti-vibration system with PU soft grip designed to decrease the vibration effectively, and reduce fatigue. Aluminum alloy housing design makes the rotary hammer very sturdy and durable, even if the machine accidentally fell on the ground it will not be damaged.
- ✔️【DRILLING CAPACITY】 The max drilling diameter for concrete is 1-1/4 inch and for metal is 1/2 inch. ENRH3201 rotary hammer drill can reach 820 r/min no-load speed and 4200bpm max impact frequency. The SDS-Plus chuck allows for easy and secure bit changes to keep your project going（Only SDS-PLUS drill bits are acceptable).
- 【WIDE APPLICATION】 Reliable heavy duty construction rotary hammer is suitable for professional or daily home users. The ENRH3201 rotary hammer will make it an easy job no matter remove tiles or demolishing brickwork. And it is suitable for wood, masonry, concrete, brick and metal.
No matter you are a professional worker or a DIY user, ENEACRO 1-1/4 Inch SDS-Plus 13 Amp Heavy Duty Hammer Drill is definitely your wise choice. It applier to various working like dismounting walls, breaking floors, decorating houses, etc. With a good heat dissipation system, ENRH3201’s motor will not be in high temperature even after a long time of working. The safety clutch system protects users’ safety when the machine is overloading. Double layers anti-vibration control effectively reduce the vibration force during operation and avoid injury. Three different functions of drill, hammer, and hammer drill function adapt to a variety of work scenarios that are easy to switch.
| Manufacturer | ENEACRO |
| Part Number | ENRH3201 |
| Model Dimensions (l x w x h) | 15.75 x 9.84 x 3.94 Inches |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
ENEACRO focuses on building premium quality tools that adhere to the principle of safety and efficiency.
- Tank Power
- 360 degree adjustable handle
- Double layer anti-dust design
- Tangled wires
GALAX PRO Hammer Drill, 4.5A Corded Drill Impact Drill, Electric Drill with 1/2'' Keyed Chuck and Depth Gauge for Drilling GP57325
Features
- This electric drill with hammer function: Depending on your task, toggle the top button and select the hammering and drilling functions; The hammering function of drilling in concrete, the hammer function of drilling is valid in steel plate and wood. It can not be used for reinforced concrete walls
- Powerful motor: Features a 4.5 amperes copper motor to deliver a very nice performance at 3000RPM; Providing additional durability and overload production for drilling. Its max drilling capacities are: Wood - 25mm, steel - 13mm, and concrete - 13mm
- 1/2 "chuck and depth gauge: This drill comes with a rugged chuck for a variety of drill bits. The maximum diameter of the impact drill chuck is 1/2 ". It is equipped with a keyed chuck for quick and easy change of bit. The built-in depth gauge allows you to determine exactly how deep the bit should be to meet the individual requirements of the task
- Ergonomic Design: Ergonomically designed handle with rubberized soft grip fits your hand perfectly to provide maximum control and comfort
- What's included: 1 x impact drill, 1 x chuck key, 5 x construction drill bits, 1 x user manual, 1 x warranty card
The GALAX PRO Hammer Drill comes with a great number of capabilities while being a corded variant makes it very powerful. Some of the most amazing features that it inhibits is:-
😲 Impact drill with integrated hammer function. 😲 Hammer drilling., Hand drilling, simple drilling, and screwdriving can be easily done using this tool. This device comes designed ergonomically and compactly to provide the user with great comfortability while reducing the vibrations and jerks that occur when you are drilling with a speed of 3000 RPM. Its subtleness in use makes it a highly useful device to dig holes for some decoration purpose, or building industry.
| Manufacturer | GALAXPRO |
| Part Number | GP57325 |
| Model Dimensions (l x w x h) | 10.4 x 9.2 x 3.1 Inches |
| Power Source | Corded Hammer drill |
| Voltage | 120 Volts |
This drill is equipped with a sturdy and durable chuck, which is suitable for a variety of drill bits.
- Hammer & drill functions in 1 device
- High performance & drilling capacity
- Depth gauge
- Not as such
DEWALT 20V MAX XR Hammer Drill, Brushless, 3-Speed,(DCD996B)
$239.00 in stock
Features
- DEWALT-built high power, high efficiency brushless motor of DEWALT 20V hammer drill delivers up to 75% more runtime vs. 18V NiCad brushed motors
- The cordless hammer drill features heavy-duty 1/2-inch ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
- 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model
- LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
DEWALT DCD996B 20V MAX* XR Lithium Ion Brushless 3-Speed Hammer drill features a DEWALT-built high power, high-efficiency brushless motor that delivers up to 57% more run time over brushed. This hammer drill has a heavy-duty 1/2″ ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. The 3-Mode LED light provides illumination in dark or confined spaces up to 20X brighter than the previous model, with an LED Spotlight mode with a 20-minute shutoff function allowing for extended work time in dark or confined spaces. A 3-speed, all-metal high-performance transmission optimizes tool-to-task for fast application speeds and improved run-time, with 0-38,250 BPM for fast drilling in masonry materials.
| Manufacturer | DEWALT |
| Part Number | DCD996B |
| Model Dimensions (l x w x h) | 9.85 x 3.55 x 9.07 Inches |
| Power Source | Battery Powered |
| Voltage | 20 Volts |
Features up to 2.8x faster application speed at 0-38, 250 BPM, and 2,250 RPM, is up to 82% more powerful and provides up to 2.8X more run time.
- Immensely powerful
- Highly durable
- 3-speed adjustability
- Not as such
TACKLIFE Corded Hammer Drill 1/2 Inch, Dual Drill Mode, Variable Speed Trigger, 360° Rotatable Handle, Speed Setting Knob PID01A
Features
- ▲【 POWERFUL 6AMP MOTOR】710W 6Amp Powerful motor drives the hammer drill to a high speed of 2800RPM; Come with rich accessories, ideal for installing chandelier, procesandoing furniture, wall, door, and other DIY job for the metal, glass, stone and wood, which means that most of your needs can be met
- ▲【 HAMMER & DRILL 2 FUNCTIONS IN 1】With a dual-mode selector, just switch it to easily convert drill and hammer drill function, hammer drill function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts; The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic
- ▲【 VARIABLE SPEED TRIGGER & FORWARD AND REVERSE SWITCH】Comes with a variable speed trigger(0-2800 RPM), this hammer drill allows you to set any speed of your choice, which responds to the amount of pressure you apply, offers a greater degree of speed control. Forward and reverse function can be easily switch according to your tasks, such as complete the job of tightening or loosening screws
- ▲【 360° ROTATING AUXILIARY HANDLE & METAL KEYED CHUCK】With the adjustable anti-skid auxiliary design, the rotating auxiliary handle adds flexibility and offers a better grip, convenient for operation at any angle. The metal chuck achieves more precise control, it's keyed design is much safer than normal chucks where the drill bit can slip in some cases, and it is suitable for drill bits with diameter (≤1/2 inch) to meet your various requirements
- ▲【 10 DRILL BITS SET】10Pcs different sizes, different materials drill bits make this electric drill set an ideal tool for different kinds of applications and you can choose one for yourself accordingly, such as drilling into wood, metal, plastic, masonry and concrete
TACKLIFE 1/2-inch hammer drill features a pure copper motor of 6Amp, offering strong power to the drilling work, rotating speed can be up to 2800RMP, 12 dials variable speed knob and trigger allow you to choose the exact speed for different tasks. With a metal chuck, it is easy to change drill bits within a diameter of 1/2 inch(13 mm). The compact body weighs only 5.5lbs, which makes it an ideal drill for different working scenes.
| Manufacturer | TACKLIFE |
| Part Number | PID01A |
| Model Dimensions (l x w x h) | 10.2 x 2.6 x 7.5 Inches |
| Power Source | Corded Eklectric |
| Voltage | 120 Volts |
The detachable depth rod allows you to determine exactly how deep the bit should go to meet the individual requirements of the task.
- Rotatable side handle
- variable speed trigger
- hammer & drill 2 functions in 1
- Wire tangle,ment is a concern
SKIL 6445-04 7.0 Amp 1/2 Inch Hammer Drill
Features
- Poweful 7.0 amp motor for tough applications
- 1/2 in. keyed chuck to accept large diameter bits designed for woodworking and cutting
- Side assist handle for controlled, accurate drilling
- Variable Speed trigger for controlled drilling speed
This powerful SKIL 6445-04 7 Amp 1/2 Inch corded hammer drill is the ideal tool for tough applications. The 1/2 In. keyed chuck accepts larger diameter bits designed for woodworking and cutting while the side-assist handle provides more support when needed. The variable speed trigger accelerates smoothly from low to high speeds, while the 2-finger trigger with the lock-on option gives you even more control.
| Manufacturer | SKIL |
| Part Number | 6445-04 |
| Model Dimensions (l x w x h) | 13..25 x 10 x 3 Inches |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
1/2 inch keyed chuck to accept large diameter bits designed for woodworking and cutting.
- Ergonomically Designed
- Power through tough jobs like a pro
- Variable speed options
- Not as such
Milwaukee 2804-20 M18 FUEL 1/2 Inch Hammer Drill Tool-Peak Torque = 1,200
3 used from $104.45
Features
- Power state Brushless motor: purposely built for the M18 Fuel 1/2" Drill driver to provide up to 60% more power than the competitive set
- Redlink Plus Intelligence: ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system.
- Red Lithium XC5.0 battery pack: delivers more work per charge and more work over the life of the pack than competitors
- Up to 60% more power: 1, 200 in-lbs of torque
The Milwaukee 2804-20 M18 FUEL 1/2 Inch Hammer Drill comes with a Power state Brushless motor which is purposely built for the M18 Fuel 1/2″ Drill driver to provide up to 60% more power than the competitive set. Furthermore, it comes with a Redlink Plus Intelligence which ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system.
| Manufacturer | MILWAUKEE |
| Part Number | 2804-20 |
| Model Dimensions (l x w x h) | 5 x 9 x 11 Inches |
| Power Source | Battery Powered |
| Voltage | 20 Volts |
Red Lithium XC5.0 battery pack: delivers more work per charge and more work over the life of the pack than competitors.
- Up to 60% more power
- 1200 lbs of Torque
- Power state brushless motor
- Less powerful than corded drills.
PORTER-CABLE 20V MAX Hammer Drill Kit, Compact (PCC621LB)
Features
- DEWALT hammer drill motor provides 283 MWO for heavy jobsite applications
- High performance cordless hammer drill delivers 25,500 BPM for drilling speed in masonry
- 1/2-inch Chuck for improved bit retention
- Compact size at 8.75-inch
- Lightweight design at 3.6 lbs
The PORTER-CABLE PCC621LB 20v MAX* Compact Hammer Drill Kit is a high-performance hammer drill that delivers 25,500 BPM for drilling speed in masonry. Its motorPCC621lb provides 283 MWO for heavy job site applications. This drill features a 2 Speed gearbox with 1,500 MAX RPM for speed of fastening, with a 1/2″ chuck for improved bit retention. This tool offers a compact size of 8.75″, with a lightweight design at only 3.6 lbs.PORTER-CABLE
| Manufacturer | PORTER-CABLE |
| Part Number | PCC621LB |
| Model Dimensions (l x w x h) | 6 x 9 x 8.75 Inches |
| Power Source | Battery Powered |
| Voltage | 20 Volts |
High performance hammer drill delivers 25,500 BPM for drilling speed in masonry.
- Batteries ansd charger available separately
- Compact & lightweight
- 2 speed gearbox
- Batteries & Charger not included.
Bosch 11255VSR Bulldog Xtreme - 8 Amp 1 Inch Corded Variable Speed Sds-Plus Hammer Drill with Carrying Case
Features
- 3 MODES: multi-function selector offers 3 modes of operation; Rotation-only, rotary hammer, and hammer only mode; Variable speed trigger with reverse offers accurate bit starting or easy fastener removing
- EASE OF USE: vibration control for comfort in all day applications
- ERGONOMIC: D-handle design provides comfort and optimal control, especially for overhead or downward drilling applications
- CONVENIENT: SDS-plus bit system provides tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer; Vario lock positioning offers 36 bit positions for optimized chiseling angle
- POWER: 7.5 amp motor produces 0.1,300 RPM and 0.5,800 BPM to power through the toughest applications; delivers 2.0 feet /pounds of impact energy for maximum performance
Get a fast, long-lasting rotary hammer with the Bosch bulldog extreme 1 in. hammer drill. It features a multi-function selector that quickly shifts between rotation only, rotary hammer, and hammer only modes for optimal versatility. It also has a variable-speed reversing trigger for accurate bit starts and simple removal of fasteners and bound bits.
The totally redesigned Bulldog Xtreme outlasts the competition in both speed and performance. Multi-function selector has 3 modes of operation: rotary hammer, hammer-only and rotation-only mode. Vario-Lock Positioning rotates and locks chisel into 36 different positions to optimize working angle. The patented rotating brush plate provides equal power in forward and reverse. Cord turret has a 35-degree pivot for added flexibility and longer cord life.
SDS-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. Variable-speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. The 11255VSR has a comfortable D-handle grip design for greater control, especially when drilling overhead or downward.
| Manufacturer | BOSCH |
| Part Number | 11255VSR |
| Model Dimensions (l x w x h) | 22.5 x 11.25 x 4.75 Inches |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
Multi-function selector offers 3 modes of operation; rotation only, rotary hammer, and hammer only mode; Variable speed trigger with reverse offers accurate bit starting or easy fastener removing.
- Ease of us
- Ergonomic handle design
- Convenient to use in various scenarios
- Not as such
AOBEN 1-1/4 Inch SDS-Plus Hammer Drill with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete (AB2132ZA)
Features
- 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal.
- 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button.
- 【ERGONOMIC DESIGN】 AOBEN Roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life.
- 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush Portable Carrying Case provides the perfect storage.
- 【MULTIFUNCTION】 AOBEN Professional rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. AOBEN provide 24 months warranty service.
The AOBEN 1-1/4 Inch SDS-Plus Hammer Drill has a powerful 13-ampere motor that can drill through concrete like a fist through a paper. The ergonomic design of this beast was made for your complete comfort. It is designed to bring comfort to your hands while performing those robust tasks. The vibration control design keeps you away from feeling a thing and the ergonomic design delivered with a fully-adjustable rubber 360-degree handle lets you hold on to the drill in just about any position.
The cleverly designed heat exhaust system effectively avoids the motor from overheating and protects it from problems caused due to excessive temperature. A double layer bottom structure accounts for our hammer drill’s anti-dust design which keeps the dust and other residues from settling inside the drill, resulting in extended use life.
| Manufacturer | AOBEN |
| Part Number | AB2132ZA |
| Model Dimensions (l x w x h) | 17.4 x 13.35 x 5 Inches |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
OBEN roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling .
- Multifunctional
- More robust than your wall
- A bit heavy (But the pros will outplay the cons on any given day).
Makita XPH07MB 18V LXT BL Hammer Drill Kit
Features
- BL Brushless Motor delivers 1,090 in.lbs. of Max Torque
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- All metal variable 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
- 18-Volt LXT Lithium-Ion 4.0Ah battery BL1840B, features an integrated L.E.D. battery charge level indicator (for MB kits)
The Makita 18V LXT Lithium-Ion Cordless 1/2″ Hammer Driver-Drill breaks new ground with a full 1,090 inch-lbs. of torque for the most demanding drilling and driving applications in wood, masonry and metal. It’s powered by a Makita BL Brushless Motor for longer run time, increased power and speed and longer tool life. The XPH07M is positioned at the top of Makita’s deep line-up of driver-drills and is a workhorse tool engineered with durability features for operation in harsh job site conditions. The 18V LXT 4.0Ah battery provides 35% more run time per charge than the BL1830 battery, yet it charges in only 40 minutes – the fastest charge-time in the category – for less downtime and increased productivity.
| Manufacturer | Makita |
| Part Number | XPH07MB |
| Model Dimensions (l x w x h) | 5.6 x 19.7 x 14.5 Inches |
| Power Source | Battery Powered |
| Voltage | 18 Volts |
Choosing a power tool was never an easy task but here our GV Experts have put together a series of advice and suggestions for your convenience so that you can land yourself with the best hammer drills that can help you complete your projects with ease and faster and should be well balanced and feel good in your hands. But before getting into the features let’s take a tour of why the hammer drills are best in their business.
Which is Better a Hammer Drill Machine or a Rotary Hammer Drill
Generally, a rotary hammer drill is bigger in size and has a greater weight which makes them ideal to be used in bigger projects like at the construction sites. The best hammer drills are small and lighter than the rotary drill and are capable of taking smaller jobs at home, garage and workshop. The hammer drill machine uses two discs to generate the up and down pounding effect.
The pounding effect in a rotary hammer drill comes from a piston which is driven by a crankshaft making it highly powerful. Due to this heavy pounding effect, it becomes hard to control the rotary hammer even for the professionals but the added advantage is that they are highly durable and live for a longer period of time. The hammer drill machine has sophisticated bits compared to the rotary hammer but is highly efficient as they provide greater precision and accuracy.
Read on to find out more about the differences between a hammer drill and a rotary hammer drill.
Which is best a Cordless Hammer Drill or an Impact Drill?
The best hammer drills use a constant pounding effect to create holes in concrete, stones and brick without any rotational movement. The impact drill is also capable of doing the same work but with a rotational movement which makes it ideal for sanding and polishing works. The former makes use of the hammer drill bit for drilling holes into hard surfaces while the latter uses masonry bits to drill holes with a rotational movement.
The hammer setting is used to bore into sturdy materials like concrete, asphalt, brick, and stone. It works by powering the motor enough to create a hammering action with the mechanism inside your drill press that can work quickly and efficiently. There are various factors to consider buying the best hammer drills like its reliability, compatibility, durability, the power it delivers, etc. Considering these factors will easily take you to the best deal out there.
😲 What is the best drill for concrete?
A hammer drill is best for drilling holes in the concrete and light masonry objects like concrete slabs, blocks, bricks and mortar. They use an up and down pounding effect to drill holes in the concrete objects.
😲 What are hammer drills good for?
The best hammer drills are not made for the projects in the construction sites, rather they are designed for small projects or occasional drilling purposes like drilling holes on the concrete walls to pin a wall framing, etc.
😲 Are cordless hammer drills any good?
Yes, cordless hammer drills are great as they provide you with portability option that can be carried to different job sites without the need of any electrical outlets, They too have the same function of drilling light concrete blocks, walls and other non-masonry objects.
😲 Can you drill concrete without hammer drill?
Yes, you can drill a concrete block or wall by replacing a hammer drill with a regular drill but it will increase certain complications as regular drills don’t possess the required amount of power to drill holes in it easily. The best hammer drills are designed with a hammer pounding effect especially for drilling holes on hard surfaces.
😲 Can I use a hammer drill as a regular drill?
Yes, the best hammer drills with the adjustable power and speed feature or a model possessing the dual drill modes can be brought to use as a regular drill. The adjustable facility provides you with the power of stopping the pounding effect and thus can be used as a regular drill.
The above information shared by our GV Experts will surely help you to land the best hammer drills that meet all your projects as well as your small to big needs. These powerful drills are able to easily outperform a normal drill when dealing with hard materials, and quickly earn their keep. Some can even double as a regular drill making them highly versatile and impeccable.
Amazon.com
Amazon.com
Amazon.com
Amazon.com
Amazon.com
have questions? talk to our experts today
Buy with confidence
