3000mw CNC Bluetooth Laser Marking Machine Made Of ABS And Aluminium Alloy Material
Step 1.Insert the USB disk
Step 2: Install the “driver.exe”
Step 3: Must Copy the “English zip” to the Computer desktop and then unzip it.
Step 4: Connect the engraver to a computer
Step 5: Open the “scarves-en.exe” which is unzip from the “English zip”
Step 6: For the first engraving, you need to rotate the laser head, focusing the light to the minimum point, and try to engrave. If you can’t engrave anything, you need to repeat the focusing operation until it can works. (some customers will encounter this problem and don’t know how to solve them.)
Our power is sufficient. If the power is found to be insufficient during use, the following three conditions can be detected.
1. Check if the power supply output voltage is 12V
2. Check if the machine is connected properly
3. Check if the focuses are adjusted
Name: Desktop Laser Engraving Machine
Material: ABS(Acrylonitrile Butadiene Styrene plastic) + Aluminium alloy
Voltage: AC 110-220V
Laser power: 3000 mW
Positioning Accuracy: 0.01mm
Engraving range: 80x80mm / 3.1″x3.1″
Applicable range: Plane surface
Operating System: WIN-97/03/7/8/10 （▲Windows Vista / XP，Unix，Linux are not supported）; for Mac OS System
Picture format: JPG / GIF / BMP / DIB / ICO / CUR /PNG
Size: 15.2 x 16.6 x 14.3 cm / 5“ * 6.5“ * 5.6”
Support mobile phone Bluetooth connection
A laser carving machine for home use, mainly used in wood, bamboo, PCB, leather, paper, plastic, and so on.
1 x Laser engraver
1 x USB disk
1 x Screwdriver
5 x Screws
5 x Screw caps
1 x Power cord
1 x USB cable
2 x Wooden board
1 x Chinese / English manual
(distribute the adapter according to your country)
1. The product is a laser carving machine for home use, a tool machine, can not be compared with a laser carving machine for industrial use.
2. Do not use the laser head to point at human or livestock, do not use a laser to point at people’s eyes.
3. The laser has power. skin exposure to laser is strictly prohibited.
4. The caving machine should not be stopped while working，it will cause damage.
5. This product is not suitable for kids under the age of 14.
6. Do not fall or make any collision to the product.
7. The shell with laser cutting technology, sharp edge, please pick up and down gently to prevent scratches.
8. Metal, glass, crystal, and transparent or translucent stuff are can not be engraved.
9. The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated.
10. You might need to temporarily shut down the antivirus software before downloading the software. Otherwise, some files in the software would be mistaken for viruses and deleted by antivirus software.
11. Please according to the user manual to operate the machine. After 20 minutes of working, it needs to take a break, can not work continuously for a long time.
Specification: 3000mw CNC Bluetooth Laser Marking Machine Made Of ABS And Aluminium Alloy Material
2 reviews for 3000mw CNC Bluetooth Laser Marking Machine Made Of ABS And Aluminium Alloy Material