$398.40$446.40

Advanced TMC2208STANDARD VERSION
Clear
Free Delivery

Get free shipping across the globe.

Affordable Pricing

Factory direct prices for maximum savings

Premium Support

Pre & Post Sales customer support

Have Any Question for Us?
Ask us and get response for any of your pre sales questions.

BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing

Advantage:

Motherboard: BIGTREETECH SKR V1.3, is R&D by Shen Zhen Big Tree Technology CO., LTD…Using 32-bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved.

Touch Screen: BIGTREETECH TFT35 V2.0, ARM Cortex-M3 series STM32F103VCT6 chip with 32-bit CPU 72MHz, Support serial wifi, power off, continuous play, material failure detection, shutdown, etc.;

 

BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 6BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 7BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 8BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 9BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 10BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 11BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 12BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 13BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 14BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 15BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 16BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 17BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 18BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 19BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 20BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 21BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 22BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 23BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing 24

Specification: BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing

Brand Name BIQU
Model Number BIQU Legend
CE Certification Yes
Fliament PLA, ABS, TPU, Wood
Nozzle Diameter The standard 0.4mm
Bed Temp 110 degree
Maximum Printing Speed 100mm/s
Printing Speed 60mm/s
Slice Software Creality Slicer/Cura/Repetier-Host/Simplify3D
Power Supply 24V 270W
Interface Type USB
Maximum Working Speed 180mm/s
Maximum Print Size 220*220*270
Precision ±0.1
Operating System Windows XP/Vista/7/8/10MAC/Linux
Slice Thickness 0.1mm-0.4mm
Language Chinese-English switching
File Format STL/OBJ/AMF
Molding Technology FDM
Printing method Online/TF card offline
The rated voltage 100-120V/200-240V 50/60Hz
Nozzle maximum temperature 250 degree
Quantity of nozzles 1

5 reviews for BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing

4.6 out of 5
3
2
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. R***v

    Printer awesome! Only посл check remained in the tube a piece of plastic! Plastic did not pass!

    Helpful(0) Unhelpful(0)You have already voted this
  2. O***r

    A+

    Helpful(0) Unhelpful(0)You have already voted this
  3. A***v

    The order was sent for a long time, in general, a month and a half passed before receiving. The head of the extruder was bent by 15 degrees, I had to disassemble the whole head and correct the angle in a vice. The table is also crooked, also was corrected in a vice. The rolls are almost all chipped, it may roll over time, but it’s not nice. In general, a good device for its price. You can take it. ————————————————————————————————————- The order was sent for a long time, in general it took a month and a half to receive it. The head of the ectruder was bent degrees by 15, had to disassemble the entire head and in the vice to edit the angle. The table is also crooked, also had to shamanize. Rollers almost all with chips, over time it is possible to roll, but not nice. In general, a good device for its price. You can take it.

    Helpful(0) Unhelpful(0)You have already voted this
  4. M***v

    The printer exceeded expectations. Simplicity and good assembly. The first model was printed at a decent level. Of the pros: -Price and easy assembly Of the shortcomings: -Some wheels have a mechanical defect (pochany), and had a plaque in the places of contact with the guides. I had to additionally clean and change the wheels. -Perhaps because of the pre-New Year’s excitement, the sending of the model was slightly tightened. -Cooling fan at the bottom of the case noisy Result: After eliminating small backlash and setting the levels of guides-printing models is just wonderful! For such a price, perhaps the best printer for entry level.

    Helpful(0) Unhelpful(0)You have already voted this
  5. A***v

    The printer is good, but I was sent used, rollers are inflated, fans rattle like a cart. In general, everything is for the buyer.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing
    BIQU Legend 3D Printer with SKR V1.3 Mother Board and Resume Printing

    $398.40$446.40

    GeekyViews ®️
    Reset Password