TB5100 5-axis mach3 USB controller card, suitable for all versions of mach3 software, support for all versions of Windows operating system, easy to use, very suitable for the users that using mach3 software to make engraving machine.
TB6600 1 Axis driver board uses a new original Toshiba TB6600 chip, stable, locked without any noise. The radiator shell is enough big, the cooling effect is very good!
Send free four white plastic Isolation columns, enabling customers to a fixed support, isolation driver board very convenient!
STB5100 control card’s features:
1. Support for Windows XP, Windows 7 32/64bit, Windows8, Windows10 operating system;
2. Applicable to all versions of mach3 software;
3. Support for CNC controlled 5-Axis can connect five stepper motor driver or servo driver;
4. The maximum output pulse frequency is 100KHz, and the pulse width can automatically change with the pulse frequency, which can be applicable to the closed-loop driver of strict requirements on pulse；
5. Five optocoupler isolation input signal interfaces: limit switch, emergency stop switch, auto tool zero sensor, home switch, NPN sensor switch can be connected;
6. Inverter control signal interface (optocoupler isolation): Output 0-10V speed control signal, PWM speed control signal, spindle start control signal, used for mach3 software to control spindle’s speed, start and stop;
7. Four universal output signal interfaces, the maximum output 500MA current, can drive relays, solenoid valves, used to control mist, pumps, cylinders and other equipment;
8. Support for external connect electronic handwheel, use HDR15 interface to connect electronic handwheel, used for manual control of machine tools;
9. Add the enable signal interface, can be used to control the driver enable signal;
10. The power of control card: voltage 12-24VDC, currently more than 500MA.
TB6600 1 Axis stepper motor driver board’s features:
1.DC power input type:12V~40V;
2.Output current:0~4.5A, stepless adjustable;
4. Automatic half current function: half or full current can be Selected through the switch;
5.Protect from: Overheated protection, over-current protection;
1.24V+: DC power positive pole
2.GND: DC power cathode
3.A+ A-: Stepping motor one winding
4.B+ B-: Stepping motor other winding
5.CLK-: Stepping pulse input+5V (Rising edge effective, rising edge duration >10μS)
6.CW-: Stepping motor direction input, voltage level touched off, high level foreward, low-level reverse
8.+5V: Signal common terminal