$7.95

A4988 GreenA4988 RedDrv8825
Clear
Free Delivery

Get free shipping across the globe.

Affordable Pricing

Factory direct prices for maximum savings

30 Days Return

Guaranteed return on unsatisfied purchases

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator

Introduction:

  • The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
  • The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
  • The DRV8825 features adjustable current limiting, overcurrent, and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

Features:
Simple step and direction control interface
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
Can interface directly with 3.3 V and 5 V systems
Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
Short-to-ground and shorted-load protection
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB
Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
45 V maximum supply voltage
Built-in regulator (no external logic voltage supply needed)

Subdivision:

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 6

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 7

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 8

About A4988

Introduction:

This product is a breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefully before using this product. This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-, and sixteenth-step modes, with an output drive capacity of up to 35 V and 2 A.

The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program.The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened.

Feature:

  • Simple step and direction control interface;
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step;
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated;
  • Voltage to achieve higher step rates;
  • 3.3 and 5 V compatible logic supply
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay);
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection;
  • Short-to-ground and shorted-load protection.

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 9

Subdivision:

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 10

Package List :

1*A4988/DRV8825 Stepper Motor Driver

1*Heat sin

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 11

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 12Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 13Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 14Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 15Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 16

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 17

Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 18Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 19Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 20Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator 21

Specification: Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator

Brand Name BIQU
Item Type Driver
Model Number A4988/DRV8825 Stepper Motor Driver
Material 4-layer PCB
Type Micro stepper motor
Usage 3D Printer parts
Suitable for Ramps 1.4/Ramps 1..5/Ramps 1.6/MKS Gen V1.4/MKS Gen L/Rumba
Product name A4988/DRV8825 Stepper Motor Driver
Package Suitable Package
A4988 Color Green/Red
Stock In stock
Condition New100%

GeekyViews Buyer's Protection

We want you to shop with confidence and worry less. Our Buyer Protection ensures that your purchases are covered in the event that you encounter a problem.

Shop With Confidence

Shopping on GeekyViews is safe. When you shop with us, your privacy and online security are always guaranteed.

Refund Guarantee

If you didn’t receive your product or it is significantly different from the description, we guarantee to refund your payment.

On-Time Delivery

We want to ensure that your purchase will arrive on time, no matter wherever you are in the world.

29 reviews for Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator

5.0 out of 5
29
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Customer

    Everything is clear

    Helpful(0) Unhelpful(0)You have already voted this
  2. G***s

    parfait

    Helpful(0) Unhelpful(0)You have already voted this
  3. D***v

    Excellent.

    Helpful(0) Unhelpful(0)You have already voted this
  4. M***z

    not tested yet

    Helpful(0) Unhelpful(0)You have already voted this
  5. S***h

    Everything is fine, thank you.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Y***a

    It was too fast. Happy with the order.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Y***a

    Very fast.

    Helpful(0) Unhelpful(0)You have already voted this
  8. E***v

    Up to the Urals less than a month!

    Helpful(0) Unhelpful(0)You have already voted this
  9. A***v

    Fast delivery, well packed

    Helpful(0) Unhelpful(0)You have already voted this
  10. J***z

    Received, I haven’t tried them but they seem to be fine

    Helpful(0) Unhelpful(0)You have already voted this
  11. M***v

    Everything works, delivery in 20 days

    Helpful(0) Unhelpful(0)You have already voted this
  12. V***v

    Everything came in 17 days, radiators in the kit, until I checked for performance.

    Helpful(0) Unhelpful(0)You have already voted this
  13. R***o

    Perfect goods, thank you store!

    Helpful(0) Unhelpful(0)You have already voted this
  14. A***v

    Everything is OK, I advise

    Helpful(0) Unhelpful(0)You have already voted this
  15. A***v

    All OK, I advise you to take

    Helpful(0) Unhelpful(0)You have already voted this
  16. A***v

    The goods are good, I advise

    Helpful(0) Unhelpful(0)You have already voted this
  17. M***k

    delivered and ok

    Helpful(0) Unhelpful(0)You have already voted this
  18. M***h

    The goods did not come, the parcel on the way was 56 days, the store fed promises that everything will come, but niche, opened a dispute for a refund

    Helpful(0) Unhelpful(0)You have already voted this
  19. T***A

    Delivery to Arkhangelsk 30 days.

    Helpful(0) Unhelpful(0)You have already voted this
  20. M***v

    The goods are satisfied. Not happy with the Mail. For a very long time there are parcels.

    Helpful(0) Unhelpful(0)You have already voted this
  21. N***v

    To 102 RF per month

    Helpful(0) Unhelpful(0)You have already voted this
  22. A***n

    Parts are of high quality and as described. Thank you.

    Helpful(0) Unhelpful(0)You have already voted this
  23. A***v

    perfect

    Helpful(0) Unhelpful(0)You have already voted this
  24. M***n

    very good. two weeks to Moscow!

    Helpful(0) Unhelpful(0)You have already voted this
  25. C***r

    ★★★★★ Fast shipping! Bought at a discount from the site shop.auction26.ru

    Helpful(0) Unhelpful(0)You have already voted this
  26. Customer

    Drivers came in a month, checked, workers.

    Helpful(0) Unhelpful(0)You have already voted this
  27. B***m

    Great product delivery early

    Helpful(0) Unhelpful(0)You have already voted this
  28. A***S

    Driver’s coming. Packed norms. Until I checked, took as spare

    Helpful(0) Unhelpful(0)You have already voted this
  29. K***o

    The order was made on May 2, the parcel was already at the Mail on the 20th. One of the fastest deliveries from China to Almaty. The goods is OK. A little bent one leg. But this is the specificity of handling parcels. I think it will work. I haven’t checked yet. I’m happy with everyone. I did not communicate with the store.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Related Products
    • Show all
    Show next
    Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator
    Stepper Motor Driver With Heat sink as 3D Printer Parts with Built-in Regulator
    Sharing Is Love

    Share this page with your friends and family and help them discover us. 

    Share on facebook
    Facebook
    Share on twitter
    Twitter
    Share on linkedin
    LinkedIn
    Share on email
    Email
    Share on whatsapp
    WhatsApp
    High Quality Selection

    Total product quality control for peace of mind

    Affordable Pricing

    Factory direct prices for maximum savings

    Express Shipping

    Fast, reliable delivery from global warehouses

    After Sale Support

    Instant access to professional support

    GeekyViews ®️
    Reset Password

    Don't leave just yet...

    Before you go, enter your email address to sign up to our newsletter and

    GET 5% OFF

    on your first purchase with us.

    • World Wide FREE Shipping
    • 30 Days Money Back

    Thank you

    Your coupon code is

    SAVE5

    Use it on the cart or checkout page to avail the discount.

    We have also sent the code to your email. Please check your inbox and spam folder as well.