Fusion Splicer Signal Fire AI-9, 6-Motor Core Alignment, 5 s Splice, with OPM and VFL
Pickup currently not available
The Signal Fire AI-9 is a six-motor core alignment fusion splicer for trunk, FTTH and enterprise fiber work. It splices in about 5 seconds and heats a sleeve in about 15, with typical single-mode splice loss of 0.025 dB. A built-in optical power meter and visual fault locator let you check the link without reaching for another tool, and the 7,800 mAh battery covers roughly 240 splice-and-heat cycles on one charge.
Key features
- Six-motor core alignment with auto focus, for low-loss splices on single-mode, multimode, DS and NZDS fiber.
- Fast cycle: about 5 s splicing and 15 s heating.
- 3-in-1 fiber holder for bare fiber, pigtails and drop cable.
- Built-in optical power meter and visual fault locator.
- 7,800 mAh battery: about 240 splice-and-heat cycles per charge, recharge in 3.5 hours or less.
- 5-year manufacturer warranty on the splicer.
Specifications
| Alignment | Core / cladding, 6 motors, auto focus |
|---|---|
| Applicable fiber | SM (G.652, G.657), MM (G.651), DS, NZDS (G.655) |
| Typical splice loss | SM 0.025 dB, MM 0.01 dB, DS/NZDS 0.04 dB |
| Return loss | Better than 60 dB |
| Splicing time | About 5 s |
| Heating time | About 15 s, adjustable |
| Magnification | 320x (single axis view), 200x (dual axis view) |
| Built-in tools | Optical power meter, visual fault locator |
| Battery | 7,800 mAh lithium, about 240 splice-and-heat cycles, charge time 3.5 h or less |
| Power adapter | Input AC 100 to 240 V, 50/60 Hz; output DC 13.5 V |
| Warranty | 5 years on the splicer; battery and power adapter 1 year |
Applications
FTTH and access networks
Splice drop cable and pigtails at closures and terminals, and confirm the result with the built-in power meter.
Trunk and backbone work
Core alignment keeps loss low on long single-mode runs, where small losses at many splices add up.
Enterprise and data center
Splice multimode and single-mode fiber in comms rooms and use the visual fault locator to trace patch cords and find breaks.
Warranty terms
The 5-year warranty covers the splicer itself. Tools whose life depends on use, such as the cleaver, clamps, strippers and fiber holders, and electrodes, which are a consumable, are not covered. The battery and power adapter carry a 1-year warranty.
Frequently asked questions
Which countries do you ship this splicer to?
We currently ship the AI-9 to the United States and Australia, with duties and taxes included in the price.
How often do the electrodes need replacing?
Electrodes wear with use and are a consumable item. Replace them when splice quality drops or the splicer prompts you.
Is it core alignment or cladding alignment?
Core alignment with six motors, which gives lower and more consistent splice loss than cladding alignment.