Skip to product information
OTDR Launch Cable Box 1 km, Single-Mode G.652D, SC Connectors
$139.00
Pickup currently not available
Every OTDR has a dead zone at its own port, so the first connector on a link cannot be measured accurately if the OTDR is plugged straight in. A launch cable puts a known length of fiber between the OTDR and the link, so the first connector falls on a clean part of the trace. This box holds 1 km of single-mode G.652D fiber with SC connectors on both ends, in a compact case that sits next to the OTDR.
Key features
- 1 km of G.652D single-mode fiber, long enough to clear the dead zone of most handheld OTDRs.
- SC connectors on both ends, UPC or APC on the link side.
- Compact protective box that keeps the fiber coiled and the connectors covered.
- Use it as a receive cable at the far end to measure the last connector too.
Specifications
| Fiber | Single-mode, ITU-T G.652D |
|---|---|
| Length | 1 km |
| OTDR side connector | SC/UPC |
| Link side connector | SC/UPC or SC/APC (choose below) |
| Other lengths and connectors | 500 m and 2 km, FC and LC, available on request |
Frequently asked questions
Which connector should I choose?
Match the link side to the connectors on the network you test. FTTH and PON networks usually use SC/APC (green); many enterprise and backbone links use SC/UPC (blue).
Is 1 km long enough?
For most handheld OTDRs, yes. Long-haul OTDR work at long pulse widths can benefit from 2 km; contact us for that length.