OTDR Tester Komshine QX55-S, Single-Mode 1310/1550 nm, 32/30 dB, with OPM, VFL and Light Source
Pickup currently not available
The Komshine QX55-S is a compact single-mode OTDR for FTTx installation, acceptance testing and fault location. It tests at 1310 and 1550 nm with up to 32/30 dB dynamic range and a 1 m event dead zone, and combines an optical power meter, stabilized light source, visual fault locator and RJ45 cable tester in one 0.73 kg unit, so a technician can carry one instrument instead of four.
Key features
- Dual-wavelength OTDR: 1310/1550 nm, 32/30 dB dynamic range, distance ranges up to 200 km.
- Short dead zones: 1 m event dead zone and 3.5 m attenuation dead zone for resolving closely spaced connectors and splices.
- Four tools in one: built-in optical power meter, light source, 10 mW visual fault locator and RJ45 network cable test.
- Pass/fail analysis: automatic event table and pass/fail judgement against set thresholds.
- Field-ready: 3.5" colour display, 0.73 kg, 3000 mAh battery, results stored internally and exported over USB.
- 3-year manufacturer warranty.
Specifications
| Wavelengths | 1310 / 1550 nm |
|---|---|
| Dynamic range | 32 / 30 dB |
| Applicable fiber | Single-mode (ITU-T G.652) |
| Event dead zone | 1 m |
| Attenuation dead zone | 3.5 m |
| Distance ranges | 0.5 to 200 km |
| Pulse widths | 5 ns to 20 µs |
| Sampling points | Up to 80,000; minimum resolution 0.04 m |
| Attenuation accuracy | ±0.03 dB/dB |
| Reflectance accuracy | ±2 dB |
| Optical power meter | -70 to +6 dBm, 800 to 1650 nm, ±0.2 dB, 2.5 mm universal adapter |
| Light source | 1310 / 1550 nm, ≥ -10 dBm, CW / 270 Hz / 1 kHz / 2 kHz |
| Visual fault locator | 650 nm, 10 mW, CW / 2 Hz |
| RJ45 test | Cat5 / Cat6, up to 300 m |
| Optical connector | SC/UPC (FC, ST, LC optional) |
| Display | 3.5" colour TFT, 640 x 480 |
| Battery | 3000 mAh, approx. 5 hours operation |
| Storage | 1,000+ traces internal, USB export |
| Dimensions | 118 x 218 x 55 mm |
| Weight | 0.73 kg |
| Operating temperature | -10 to 50 °C |
| Warranty | 3 years |
Applications
FTTx and access network installation
Verify drop and distribution fiber after splicing, locate high-loss splices and bad connectors, and document each link with a saved trace.
Fault location and repair
Find the distance to a break, macrobend or crushed cable, then use the built-in visual fault locator to pinpoint it at the closure or patch panel.
Loss testing and acceptance
Use the built-in light source and power meter for end-to-end loss measurement alongside the OTDR trace, without carrying a separate loss test set.
Frequently asked questions
Can the QX55-S test through PON splitters?
It is designed for point-to-point single-mode links. For testing live PON networks through splitters, choose the QX55-P, which adds a filtered 1625 nm port.
What is the maximum test distance?
Distance ranges extend to 200 km. Usable range on a real link depends on its total loss relative to the 32/30 dB dynamic range.
Do I need a launch cable?
A launch cable is recommended to measure the first connector accurately, because every OTDR has a dead zone at its own port.
Which connector does it use?
SC/UPC as standard. FC, ST and LC adapters are available as options.