Fiber Inspection Probe Komshine KIP-600V, 400X Video Microscope with 3.5-inch Display
Pickup currently not available
Dirty and damaged connector end faces are the most common cause of high loss and reflectance on a fiber link. The Komshine KIP-600V is a handheld video inspection probe with 400X magnification and its own 3.5-inch display, so you can check a connector or a bulkhead port in seconds without a laptop, then save a photo or video as a record of the clean end face.
Key features
- 400X magnification to show scratches, pits and contamination on the end face.
- 3.5-inch built-in display: no phone, tablet or laptop needed.
- Photo and video capture to a memory card, with playback on the unit.
- Interchangeable tips for patch cords and bulkhead adapters.
- USB for charging and transferring saved images.
Specifications
| Magnification | 400X |
|---|---|
| Display | 3.5-inch LCD |
| Capture | Photo and video, saved to SD/TF card |
| Standard tips | LC/PC, SC/PC, 1.25 mm universal, 2.5 mm universal |
| Interface | USB (charging and file transfer) |
| Power | Rechargeable lithium battery |
Applications
Inspect before you connect
Check every connector before mating it, and clean only when the image shows contamination.
Troubleshooting high loss
When an OTDR trace or power meter shows a bad connection, inspect both sides to see whether the cause is dirt or a damaged end face.
Handover records
Save an image of each end face as part of the test record for a new installation.
Frequently asked questions
Can it inspect APC connectors?
The standard tips are for PC/UPC connectors. APC tips are available separately; contact us with the connector types you need.
Does it need a phone or computer?
No. The image is shown on the built-in 3.5-inch display. USB is only needed for charging and copying saved files.