OTDR Tester Komshine QX65, 7-inch Touch Screen, Single-Mode 1310/1550 nm, with OPM, VFL, Light Source and Link Map
Pickup currently not available
The Komshine QX65 is a full-size single-mode OTDR for backbone, FTTx and PON maintenance work. A 7-inch multi-touch capacitive screen, 0.8 m event dead zone and a 10,500 mAh battery rated for more than 12 hours make it a field instrument for long days on fiber routes. It combines the OTDR with an optical power meter, stabilized light source, visual fault locator, RJ45 test and support for a fiber inspection probe, so one case covers fault location, loss testing and connector checks.
Choose your model
- QX65-S1: 1310/1550 nm, 32/30 dB dynamic range. For FTTx, access and campus links.
- QX65-S2: 1310/1550 nm, 35/33 dB dynamic range. For longer routes and links through higher-ratio splitters.
Key features
- 7-inch capacitive touch screen with pinch-to-zoom on traces.
- 0.8 m event dead zone for resolving closely spaced connectors and splices.
- Link map view that turns the trace into a simple diagram of events with pass/fail marking.
- Built-in tools: optical power meter, light source, visual fault locator and RJ45 cable test, plus fiber inspection probe support and VNC remote control.
- All-day battery: 10,500 mAh, more than 12 hours of operation.
- 3-year manufacturer warranty.
Specifications
| Wavelengths | 1310 / 1550 nm |
|---|---|
| Dynamic range | S1: 32 / 30 dB; S2: 35 / 33 dB |
| Applicable fiber | Single-mode |
| Event dead zone | 0.8 m |
| Display | 7-inch multi-touch capacitive |
| Built-in functions | OTDR, optical power meter, light source, visual fault locator, RJ45 test, fiber inspection probe support, VNC remote control |
| Optical connector | SC (standard) |
| Battery | 10,500 mAh, more than 12 hours operation |
| Warranty | 3 years |
Applications
Backbone and long-haul maintenance
Locate breaks, bends and high-loss splices along long single-mode routes, and save each trace as a record of the repair.
FTTx and PON installation
Check feeder and distribution fiber after splicing, and use the link map view to show a crew or client exactly where each event sits.
Acceptance and loss testing
Pair the OTDR trace with an end-to-end loss reading from the built-in light source and power meter, without carrying a separate loss test set.
Frequently asked questions
Should I choose the S1 or the S2?
The S1 suits most access and FTTx work. Choose the S2 when links are long or pass through high-ratio splitters, where the extra 3 dB of dynamic range lets the trace reach the far end.
Do I need a launch cable?
A launch cable is recommended so the first connector falls outside the OTDR's own dead zone and can be measured accurately.
Can I inspect connectors with it?
Yes. The QX65 supports a fiber inspection probe, so you can check connector end faces on the same screen.